Planar 2D Auxiliary Vehicle Heater with PU-5 control

We offer the Planar 2D auxiliary vehicle heater as a well-priced, powerful alternative to the Webasto auxiliary vehicle heater kits. With their compact size and a heater output of 1.8 kW, the Planar 2D is well-suited for fitting to smaller vehicles, vans, off-roaders, camper vans, boats or in confined spaces. It is ideal for ‘typical’ off-road vehicles like the Land Rover Defender, Mercedes G or Jeep Wrangler JK. The extensive fitting kit that is supplied with each heater make fitting easy.

The Planar 2D can be easily controlled via its control unit, with 8 settings available from 0,8 – 1,8 kW heat output.

The parking heater is approved for the European market (ECE mark) and can be installed without extra TUV registration.

The hole pattern is the same as that of Eberspächer Airtronic and Webasto AirTop 2000 heaters, so that an old unit could easily be replaced without drilling additional holes.

All Planar 2D auxiliary vehicle heaters are extremely long-lasting and durable as well as very frugal.

The heater can also be used while driving.

And extensive range of additional equipment is available in our online shop.

Attention Defender drivers: Our extensive Planar full-set for Land Rover Defender not only includes everything needed to perfectly fit the heater to your Tdi, Td5 or Td4 Defender, but also offers considerable savings over the individual purchase of all included items.

Comes with:

·         digital control unit PU-16M
·         proportioning pump P327
·         rubber fitting pump
·         wiring harness pump
·         wiring harness heater unit
·         intake hose with integrated muffler
·         heat-protective hose
·         end piece exhaust pipe with clamp
·         tank suction tube
·         5.5m fuel line
·         300mm fuel line coupling
·         1m metal exhaust pipe
·         exhaust muffler
·         fixings (screws, nuts, clamps, heat shrink tube, cable ties)
·         manual

Technical details:

·         fuel: diesel
·         heat output: max. 1,8kw, min. 0,8kw
·         air volume: max. 75m³/h, min. 34m³/h
·         fuel consumption: max. 0,24l/h, min. 0,1 l/h
·         power drain: max. 29W, min. 10W
·         manual start/stop

The AUTOTERM Luft 2D (Planar 2D URAL EDITION) is equipped with a height kit!
This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the atmospheric oxygen content drops. The max. Heating power drops in proportion to the amount of oxygen in the air. Roughly one can say: From 2000 meters the loss of power per 500m height is approx. 5%. Manufacturer tests up to 3440m were no problem. No difficulties are to be expected up to 4000m. The software itself calculates up to 5000m – however, this has not yet been tested in real height.

The control unit with timer features a larger OLED display and more intuitive operation. Temperature, ventilation and output can be configured via a display and various switches. An added timer clock allows you to set the heater to a specific time. OLED display provides maximum visibility with minimum power drain.

Possible settings:
– temperature and output
– time and date
– language (English or Russian)

Features of the new timer clock:
– daily: one fixed time at which the heater starts each day
– individual: up to thee different settings with different days and times.