Madman EGT1 Exhaust Gas Temperature Meter

The MadMan EGT1 unit is a single, fully programmable Exhaust Gas Temperature Monitor. The unit can measure from -270 to 1200 deg C (-454 to 2192 Deg F) The EGT1 also offers a battery voltage display with programmable high/low voltage alarm, built in hour meter and service interval timer. The unit can run on 12 or 24V DC supply and is auto sensing. The unit comes standard with one 1m wiring harnesses.

• Operating Temperature Range -10ºC to 50ºC (14ºF to 122ºF)
• Storage Temperature Range -20ºC to 80ºC (-4ºF to 176ºF)
• Humidity <85% non-condensing
• Power Supply 8 to 30Vdc SMPS (Switch mode power supply) with built in 33V over voltage
• and reverse voltage protection
• Current Consumption approx. 40mA/10mA @ 13.8V (backlight on/off)
• Display 114×65 graphics LCD display. Contrast and backlight is user configurable
• ADC 12 bit over sampled successive approximation
• Alarm Red LED,an audible alarm and an open collector transistor output.
• EGT probe K-Type or J-Type thermocouple probes
• EGT compensation K-Type and J-Type probe linearization with build in precision internal
• temperature reference
• Alarm Contact Transistor open collector, Max current = 250mA
• Dimensions 60mmx60mmx61mm (2.36”x2.36”x2.40”) (See attached dimensional drawing)
• Enclosure 2.25” ABS, black in color, front or rear mounting
• Non-volatile memory storage 100000 write cycles
• Weight 96g

Manual available here

Basic Installation instructions available here